-Internet of Things
LFE2M35SE-5FN484I FAQ Chips
Q: Do I have to sign up on the website to make an inquiry for LFE2M35SE-5FN484I?
A: No, only submit the quantity, email address and other contact information required for the inquiry of LFE2M35SE-5FN484I, but you need to sign up for the post comments and resource downloads.
Q: How to obtain LFE2M35SE-5FN484I technical support documents?
A: Enter the “LFE2M35SE-5FN484I” keyword in the search box of the website, or find these through the Download Channel or FPGA Forum .
Q: Does the price of LFE2M35SE-5FN484I devices fluctuate frequently?
A: The RAYPCB search engine monitors the LFE2M35SE-5FN484I inventory quantity and price of global electronic component suppliers in real time, and regularly records historical price data. You can view the historical price trends of electronic components to provide a basis for your purchasing decisions.
Q: How can I obtain software development tools related to the Lattice FPGA platform?
A: Lattice’s development environment uses Diamone. These recommendations are all reference opinions. The specific choice depends on personal habits and functional requirements to specifically select a more suitable match. You can search and download through the FPGA resource channel.
Q: Where can I purchase Lattice LFE2M35 Development Boards, Evaluation Boards, or LatticeECP2/M Starter Kit? also provide technical information?
A: RAYPCB does not provide development board purchase services for the time being, but customers often consult about ZedBoard, Basys 3 board, TinyFPGA BX, Nexys4-DDR, Terasic DE10-Nano, Digilent Arty S7, etc. If you need relevant technical information, you can submit feedback information, our technicians will contact you soon.
Q: What should I do if I did not receive the technical support for LFE2M35SE5FN484I in time?
A: Depending on the time difference between your location and our location, it may take several hours for us to reply, please be patient, our FPGA technical engineer will help you with the LFE2M35SE-5FN484I pinout information, replacement, datasheet in pdf, programming tools, starter kit, etc.
ICs LFE2M35SE-5FN484I Features
■ High Logic Density for System Integration
Request LFE2M35SE-5FN484I FPGA Quote, Pls Send Email to Sales@hillmancurtis.com Now
Xilinx LFE2M35SE-5FN484I Overview
The LatticeECP2/M family of FPGA devices is optimized to deliver high performance features such as advanced DSP blocks, high speed SERDES (LatticeECP2M family only) and high speed source synchronous interfaces in an economical FPGA fabric. This combination was achieved through advances in device architecture and the use of 90nm technology. The LatticeECP2/M FPGA fabric is optimized with high performance and low cost in mind. The LatticeECP2/M devices include LUT-based logic, distributed and embedded memory, Phase Locked Loops (PLLs), Delay Locked Loops (DLLs), pre-engineered source synchronous I/O support, enhanced sysDSP blocks and advanced configuration support, including encryption (���S��� versions only) and dual boot capabilities. The LatticeECP2M device family features high speed SERDES with PCS. These high jitter tolerance and low transmission jitter SERDES with PCS blocks can be configured to support an array of popular data protocols including PCI Express, Ethernet (1GbE and SGMII), OBSAI and CPRI. Transmit Pre-emphasis and Receive Equalization settings make SERDES suitable for chip to chip and small form factor backplane applications. Lattice Diamond庐 design software allows large complex designs to be efficiently implemented using the LatticeECP2/M FPGA family. Synthesis library support for LatticeECP2/M is available for popular logic synthesis tools. The Diamond software uses the synthesis tool output along with the constraints from its floor planning tools to place and route the design in the LatticeECP2/M device. The Diamond design tool extracts the timing from the routing and back-annotates it into the design for timing verification. Lattice provides many pre-engineered IP (Intellectual Property) modules for the LatticeECP2/M family. By using these IP cores as standardized blocks, designers are free to concentrate on the unique aspects of their design, increasing their productivity.
The Lattice FPGA – Field Programmable Gate Array series LFE2M35SE-5FN484I is FPGA – Field Programmable Gate Array 34K LUTs S-Ser SERDE S Mem DSP 1.2V -5 I, View Substitutes & Alternatives along with datasheets, stock, pricing from Authorized Distributors at RAYPCB.com,
and you can also search for other FPGAs products.
LFE2M35SE-5FN484I Tags integrated circuit
1. LFE2M35 reference design
2. LatticeECP2/M starter kit
3. Lattice LFE2M35
4. LFE2M35 development board
5. Lattice LatticeECP2/M development board
6. LFE2M35 evaluation board
7. LatticeECP2/M LFE2M35
8. LatticeECP2/M evaluation kit
9. LFE2M35 development board
Xilinx LFE2M35SE-5FN484I TechnicalAttributes
-Number of I/Os 303
-Maximum Operating Frequency 320 MHz
-Maximum Operating Temperature + 100 C
-Mounting Style SMD/SMT
-Factory Pack Quantity 300
-Minimum Operating Temperature – 40℃
-Package / Case FPBGA-484
-Operating Supply Voltage 1.2 V