Hollow soffit boards feature decorative grooves running parallel to the wall for a three-plank cladding effect. These boards can be cut into short lengths and installed using the grooves running from front to back. They also eliminate the need for soffit joint trim. These boards are available in black ash and anthracite grey.
About Hollow soffit board and manufacturers
Hollow soffit boards are popular due to their lightweight design and tongue and groove profile. They are available in different sizes from 100mm to 300mm and come with ventilation accessories. In addition, they are also available with a variety of trims. These lightweight hollow soffit boards do not require the same amount of maintenance as their solid counterparts and are not good for use as wall cladding.
Hollow soffit boards are pre-marked on the rafter end so that the installation process can be straightforward. They have 25mm-long lines marked with pin guides that help the installer cut the board accurately. This will shorten installation time and reduce the risk of damaging the board. Hollow soffit boards are also fire-resistant.
Features of Hollow Soffit Boards
Hollow soffit boards offer cost-effective, lightweight alternatives to traditional soffit boards. These boards are manufactured from modern UPVC material and come pre-coated. The lightweight construction makes these boards ideal for larger areas. Additionally, these boards have a T&G profile, allowing easy installation with small screws or stainless steel-clad pins.
Hollow soffit boards are available in various thicknesses, and you can position them on the side of the roof or at the top of a wall. We measure the thickness of these boards in millimeters. Then, depending on the thickness, we glue or screw them into place.
Hollow soffit boards are available in a range of thicknesses and widths. They are typically used in the area under the roof edge and close the gap between fascia boards and brickwork. This soffit type is lightweight, easy to install, and comes in many colors and sizes.
Black Ash and Anthracite Grey
Black Ash Soffit Board type is a great low-maintenance solution to protect your roof eaves while giving a stylish roofline finish. It is manufactured from tough UPVC and can withstand the elements all year round. Black Ash Soffit Board is available in various styles and gives your home an elegant, contemporary look.
Hollow soffit boards have a smooth, paneled finish and are easy to fit. They are available in various colors and thicknesses, and you can set them horizontally or vertically. They also feature a 10-year guarantee and are available in five-meter lengths.
uPVC Hollow Soffit Board
uPVC Hollow Soffit Board is a durable, smooth, and low-maintenance alternative to traditional materials. The material is also highly resistant to air pollution and UV damage. As a result, the board is an environmentally-friendly and cost-effective alternative to aluminum soffit boards. It also adds an attractive paneled effect to the exterior of your home.
Hollow soffit boards are available in several widths. They protect the roof’s edge and close the space between fascia boards and brickwork. This type of soffit can drastically improve the appearance of a home while requiring little maintenance. A variety of different color options are available.
uPVC Hollow Soffit Board is an inexpensive and easy-to-install option. These boards come in various colors and styles and are useful for a wide range of soffit applications. uPVC soffit boards can also be custom-made to match the aesthetic of a home. However, one disadvantage of uPVC soffit boards is that they can become brittle when exposed to sunlight. Also, they can be harder to bend and cut.
Can you use hollow soffit boards for cladding?
Hollow soffit boards are not good for cladding on exterior walls. If you wish to use them on the external face of the soffit, you should be aware that you must counter-batten them first. In addition, you should use the right starter piece to fix the cladding.
Hollow Soffit Board Quantity
Hollow soffit boards are available in different sizes. You can cut these boards into short pieces or use them as long ones with grooves running back to the wall. To know how many soffit boards you need, divide the amount by the gap between the soffit and the wall.
Installation and Minimal Maintenance
Hollow soffit board installation is a low-cost and low-maintenance option that provides homeowners with a wide array of benefits. It can reduce the risk of infestation by preventing animals and pests from entering the house through the roofline or gutters. In addition to damaging the roof and electrical system, these pests can contribute to poor air quality.
A soffit is a critical component of a house, as it supports the bottom row of roof tiles and guttering. As such, it needs to be strong and durable.
Shop the right product
You can use hollow soffit boards for cladding in a variety of applications. They feature tongue and groove edges that facilitate a neat fit when used with 25mm cladding pins.
The Upvc Hollow soffit boards are available in a variety of widths. They close the gap between fascia boards and brickwork, transforming the look of your home while they require minimal maintenance. Freefoam hollow soffit boards come in five-meter lengths with a 20-year guarantee. In addition, there is a guarantee that these boards will not warp or crack and have excellent air pollution resistance.
Fascia Boards
The Hollow soffit board profile fits together with a T&G design to make installation easy. Small screws or stainless steel-clad pins are good for securing the building. Once installed, the next length of the Hollow soffit will fit in the groove and hide the nail. Its lightweight and easy installation make it a popular choice.
The hollow soffit board is available in various sizes and styles, including aluminum and uPVC. Each has its advantages, so it’s best to consider your budget and aesthetic needs before making your final decision.
How to Install Hollow Soffit Board
When you want to add a new soffit board to your home, you must choose the right material. There are many different types of soffit boards, including PVC and aluminum. The material you choose should depend on your aesthetic preferences, durability, and the weather conditions in your region.
To complement your soffit board, you can choose an edge trim to accent the color you choose. You can choose between white, rosewood, mahogany, black grain, light oak, and anthracite grey grain.
Hollow soffit boards are generally cheaper than uPVC solid soffit boards, and you can install them quickly and easily. You can custom-design them to match any aesthetic. However, you should be aware of their disadvantages: they tend to fade in sunlight and can be difficult to cut and bend.
